Publicité
Les langues disponibles
Les langues disponibles
Navigation Controls
Home menu is
displayed.
<
> (Page Turn) buttons
Turns the page.
(Home) button
Displays the Home menu.
(Size) button
OPTIONS button
Displays the Option menu.
Touch screen
Provides simple commands by
touching the screen.
Charge indicator
Lights up when the Reader is
charging.
EN
POWER switch
Stylus
Used for precise touch screen
operations.
RESET button
DC IN jack
Used to connect the AC
Adapter for Reader (AC-
S5220E) (optional).
USB connector
Getting Started
Connect to
USB connector
1
Charge the Reader via USB (as shown above) at least 5 minutes
until "USB connected" appears on the Reader.
Keep your computer in an active mode while charging the Reader.
To fully charge the Reader, wait about 4 hours or less until the charge
indicator (lights up in red while charging) goes off.
2
Disconnect the Reader from your computer, and then follow the
on-screen instructions of the Reader to complete the initial
settings.
To select an item on the touch screen, tap the item. To apply the
setting, tap "OK."
Note
You cannot operate the Reader while it is connected to your computer.
"USB connected" screen
To AC outlet
USB cable (supplied)
EN
Publicité
