Abus FU8403 Instructions De Montage Et D'utilisation page 9

UK
Installation and operating instructions for
ABUS radio controlled display module
These instructions are subdivided as follows:
I. General information
II. Safety instructions
III. Applications
I. General information
This product complies with the requirements in the applicable European and national directives.
The conformity has been verified; the corresponding declarations and documents are deposited with
the manufacturer (www.abus-sc.com).
To maintain the condition and ensure safe operation, the user must comply with these installation instructions.
It is prohibited to modify or alter any part of the product. Avoid any finger contact with the pcb, except pressing the
keys.
Neither the author nor ABUS-SC assumes any liability for losses or damages that are caused directly or indirectly by
these instructions nor if it is claimed that such arise due to these instructions. The contents of these instructions can
be changed without prior notice.
II. Safety instructions
To prevent fires and injuries, follow the instructions below:
• Securely attach the device to a dry position in the building
• The radio controlled display module is designed solely for interior use
• Avoid temperatures under 0° C and overr + 50° C
• The maximum relative humidity must not exceed 90 % (non-condensing)
• Make sure no metallic objects can be inserted into the device from outside
• Use only the supplied 12 V power supply; other power supplies can lead to destruction of the device
• Connect the 12 V power supply to the public electric grid to a standard 230 V/50 Hz alternating current receptacle
III. Applications
Basically, compatible alarms (e.g. wireless window lock FTS 96 E, wireless magnetic contact) are taught in zones
in the radio controlled display module. These zones are optically displayed by the LEDs 01 – 16.
The radio controlled display module receives information by radio from the taught detectors on a special secure
frequency. When using the radio controlled display module in combination with the FTS 96 E, the display shows
whether the FTS 96 E is unlocked or locked and if the window is closed. When using the magnetic contact, the display
module indicates whether the window is closed if the detector has been correctly attached. The red LED on the display
module acts as a warning that you still need to close windows or additional window locks before leaving the house.
When all the diodes are green, all the windows are closed and/or secured (when using the FTS 96 E).
That means 16 different zones provide a complete overview for up to 16 detectors.
To accomplish that, we recommend installing the radio controlled display module near the house entrances,
apartment entrance doors or in other central points in the building.
IV. Contents of the package
1. Radio controlled display module
2. 12 V power supply
3. 3 inlays, DIN A5, to make your own labels
4. 4 inlays, DIN A5, for printing
5. Installation material (3 screws and 3 dowels)
IV. Contents of the package
V. Signalling concept
VI. Teaching the detectors
VII. Labelling the inlay
VIII. Installation
IX. Technical data
9