Publicité
Les langues disponibles
Les langues disponibles
Installation
STEP 1 - Straighten Hose
Remove hose from box and lay it
out in the sun to straighten.
STEP 3
Clean System
A. While the hose is
relaxing, clean and
backwash your filter
system, skimmer and
pump baskets.
B. Close main drain if
your pool has one.
C. Start pump.
STEP 5 - Submerge Cleaner
A. Start pump.
B. Turn cleaner upside down,
submerge, and feed hose down
side of pool wall to fill hose
with water.
- GW8000
STEP 2 - Check Parts
Make sure you have all
parts to pool cleaner.
Reducer Cone
Hose
STEP 4 - Assemble Cleaner
A. Insert swivel assembly
into cleaner body and
twist 1/4 turn clockwise to lock.
B. Set brush
adjuster to '0'.
Swivel
C. Slide long
Assembly
hose cuff
over swivel assembly
to install hose.
13
-
Page
Swivel
Assembly
Vacuum
Regulator
Long Hose Cuff
Publicité
