Setting Date And Time - MERCK Spectroquant Picco COD Mode D'emploi

®
Spectroquant Colorimeter Picco COD / CSB
3 Menu options
3.3 Setting date and time (24-hour format)
After confirming the selection with the [SELECT] key the value to be edited
will been shown for 2 sec.
The setting starts with the year (YYYY) followed by the actual value to be
edited. The same applies for month (MM), day (dd), hour (hh), and minutes
(mm). Set the minutes in steps of 10, press the [MENU] key to continue
setting the minutes in steps of 1.
Increase the value by pressing the [SELECT] key.
en
Decrease the value by pressing the [ZERO/TEST] key.
Proceed to the next value to be edited by pressing the [MENU] key.
After setting the minutes and pressing the [MENU] key the display will show
"IS SET"
and the instrument automatically returns to the measurement mode.
Caution:
If the battery is removed for more than one minute the data and time
menu starts automatically when the instrument is switched on the next
time insertion of new battery.
26
Date
Time
Select
SET
DATE
YYYY
(2 sec.)
Select
Zero
Select
Test
Menu
Menu
IS SET
Release 03/2009