Technical Data; Operating Messages - MERCK Spectroquant Picco COD Mode D'emploi

®
Spectroquant Colorimeter Picco COD / CSB
5

Technical data

Optical system: LED + Filter (λ = 430 nm)
Battery:
Auto-OFF:
Ambient
conditions:
CE:
en
To ensure maximum accuracy of test results, always use the reagent
systems supplied by the instrument manufacturer.

5.1 Operating messages

Important:
Water must not be allowed to enter the measurement compartment.
Soiling of the optical system results in false measurement results. Check at regular inter-
vals and clean if necessary (moist paper towels, cotton swabs).
Large differences in temperature between the instrument and the ambient conditions may
result in false measurement results
Measuring range exceeded or excessive turbidity
Result below the lowest limit of the measuring range
Replace 9-V battery, no further tests possible
Battery capacitiy is too low for the display backlight; measurement is still
possible
30
LED (λ = 605 nm)
9-V block battery
(lifespan approx. 600 tests)
Automatic switch-off
8 minutes after last key press
5 - 40 °C
30 - 90 % rel. humidy (non-condensing)
Certificate for Declaration of CE Conformity available on
request
.
H
l l
Lo
btLo
Release 03/2009