Franke FDW 908 IB XS Mode D'emploi Et Installation page 15

• Connect the Electric cables that come out of the lower
right hand part of the Hood Canopy to the Connectors
on the Electric unit.
• Each cable connector has a corresponding connector
on the Electric Unit, so take care not to make mistakes
when connecting up.
• Fix the Electric Unit to the Hood Canopy using the
screws 12a provided.
• The position indicated in the figure is only an option,
as if necessary it may also be fitted on the left of the
Hood Canopy or even left free on the base of the unit
if there are no structural or safety problems involved.
Warning..: Do not install the product in such a way that the wiring box is in contact with the floor.
EN
Fixing the Electric Unit
1
15
5