Bosch GLM 150 Professional Notice Originale page 8

Masquer les pouces Voir aussi pour GLM 150 Professional:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OBJ_BUCH-1044-001.book Page 8 Tuesday, October 13, 2009 9:49 AM
8 | English
Technical Data
Digital Laser Rangefinder
Article number
Optical sight
(magnification 1.6-fold)
A)
Measuring range
Measuring accuracy
B)
(typically)
Lowest indication unit
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter
(at 25 °C), approx.
– at 10 m (33 ft) distance
– at 150 m (492 ft) distance
Batteries
Rechargeable batteries
Battery live, approximately
– Individual measurements
– Continuous measurement
Weight according to
EPTA-Procedure 01/2003
Dimensions
Degree of protection
A) The working range increases depending on how well the laser light is reflected from the surface of the target (scat-
tered, not reflective) and with increased brightness of the laser point to the ambient light intensity (interior spaces,
twilight). In unfavourable conditions (e.g. when measuring outdoors at intense sunlight), it may be necessary to use
the target plate.
B) In unfavourable conditions (e.g. at intense sunlight or an insufficiently reflecting surface), the maximum deviation
±
±
is
20 mm per 150 m (
0.8 in per 492 ft). In favourable conditions, a deviation influence of
±
(
0.0006 in/ft) must be taken into account.
C) In the continuous measurement function, the maximum operating temperature is +40 °C.
D) Less measurements are possible when using 1.2 V rechargeable batteries than with 1.5 V batteries. The battery
life listed refers to measurements without display illumination and audio signal.
Please observe the article number on the type plate of your measuring tool. The trade names of the individual meas-
uring tools may vary.
The measuring tool can be clearly identified with the serial number 20 on the type plate.
1 609 929 T68 | (13.10.09)
GLM 150
Professional
3 601 K72 070
0.05–150 m (0.16–492 ft)
±1.0 mm (±1/32 in)
1/32 in; 0.001 ft; 0.1 mm
–10 °C...+50 °C
–20 °C...+70 °C
635 nm, <1 mW
6 mm (1/4 in)
90 mm (3 1/2 in)
4 x 1.5 V LR03 (AAA)
4 x 1.2 V HR03 (AAA)
30000
0.24 kg (8.5 oz)
66 x 120 x 37 mm
(2 19/32 x 4 23/32 x 1 15/32 in)
IP 54 (dust and
splash water protected)
3 601 K72 170
0.05–250 m (0.16–820 ft)
±1.0 mm (±1/32 in)
1/32 in; 0.001 ft; 0.1 mm
C)
–10 °C...+50 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
6 mm (1/4 in)
90 mm (3 1/2 in)
4 x 1.5 V LR03 (AAA)
4 x 1.2 V HR03 (AAA)
D)
D)
5 h
0.24 kg (8.5 oz)
66 x 120 x 37 mm
(2 19/32 x 4 23/32 x 1 15/32 in)
IP 54 (dust and
splash water protected)
±
0.05 mm/m
Bosch Power Tools
GLM 250 VF
Professional
C)
90 %
2
D)
30000
D)
5 h

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Glm 250 vf professional

Table des Matières