Sharp LL-T1610W Manuel D'utilisation page 29

The digital signal input connector pin
1 2 3 4 5
9 10 11 12 13
17 18 19 20 21
(DVI-D connector with 24 pins)
No. Function
1 TMDS data 2-
2 TMDS data 2+
3 TMDS data 2 shield
4 N.C.
5 N.C.
6 DDC clock
7 DDC data
8 N.C.
9 TMDS data 1-
10 TMDS data 1+
11 TMDS data 1 shield
12 N.C.
Power management
The monitor is based on the VESA DPMS*1 and the DVI
DMPM*2 standards.
To activate the monitor's Power Management function,
both the video card and the computer must conform to
the VESA DPMS standard and the DVI DMPM standard.
*1 DPMS: Display Power Management Signalling
DPMS mode Screen
consumption
ON Display on
STANDBY
SUSPEND Display off
OFF
*2 DMPM: Digital Monitor Power Management
DPMS mode Screen
ON Display on
OFF Display off
Specifications
6 7 8
14 15 16
22 23 24
No. Function
13 N.C.
14 +5V
15 GND
16 Hot plug detection
17 TMDS data 0-
18 TMDS data 0+
19 TMDS data 0 shield
20 N.C.
21 N.C.
22 TMDS clock shield
23 TMDS clock +
24 TMDS clock -
Power H-sync V-sync
32W Yes Yes
No Yes
1.5W Yes No
No No
Power
consumption
32W
3W
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data
Channel) standard.
DDC is a signal standard for carrying out Plug & Play
functions on the monitor or PC. It transfers information
such as degree of resolution between the monitor and
PC. You can use this function if your PC is DDC compli-
ant and if it is set so that it can detect the Plug & Play
monitor.
There are many varieties of DDC due to the differences
between systems. This monitor works with DDC1 and
DDC2B.
29