MT Logic TWINTALKER 9310 Manuel D'utilisateur page 7

9 Charging the batteries
When the batteries are installed, the
desktop charger provides drop-in
charging conveniency.
1. Put the desktop charger on a flat
surface.
2. Plug one end of the supplied
adapter into an easy accessible
electric socket and the other end
into the connector on the
backside of the desktop charger.
3. Put the radio in the charger as
indicated.
4. The charging LED will turn on if
it's properly inserted and
charging.
It will take about 8 to 10 hours to fully charge the batteries.
When the PMR's are in the desktop charger, the charging LED's will always be ON, even
when the batteries are fully charged.
Do not press the PTT-button of the PMR's while they are placed in the
charger !
Do not short-circuit the batteries or dispose in fire. Remove the
batteries if this device is not going to be used for a long period.
Do not charge non rechargeable batteries like Alkaline batteries in the
charger. This might damage the PMR's and charger unit.
Twintalker 9310
Twintalker 9310
7