MT Logic TWINTALKER 9310 Manuel D'utilisateur page 12

Twintalker 9310
12.9 VOX Selection
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended if you plan to use your radio in a noisy or windy environment.
VOX mode will be overrided when you press the PTT - button .
12.10 Channel Scan
Channel scan performs searches for active signals in an endless loop from channel 1 to 8.
Once an active channel is found you have the option to search for the CTCSS code or the
DCS code that is set by the user who is broadcasting on the channel.
12.10.1 Scanning for an active radio channel
Once an active channel is found, the scanning will stop and you can listen to the
transmission.
When the transmission on the found channel stops, the scanning will resume automatically.
If you press the PTT button while listening to a found channel, the PMR
will go back in stand-by mode on the found channel.
12.10.2 Scanning for a CTCSS code
When an active channel is found press the PTT button to select the found active channel.
Now you have to option to search for the CTCSS/DCS code that is used by the found user.
12
• Press the - button four times, the current VOX setting
flashes on the display and the VOX icon is displayed.
• Press the -button to set the VOX sensitivity level
between 1 and 3 (level 3 is the most sensitive level).
• Press the button until 'OF' appears on the display, to
turn VOX OFF.
• Press the PTT - button to confirm and return to stand-by
mode.
• Press the -button five times: "SC" and the current
channel flashes on the display.
• Press the -button or the
scan.
-button to start the channel
Twintalker 9310