Bosch NGM Guide D'utilisation page 10

• Place burner cap gently on top of base so that the
prongs of the burner base fit snugly into the groove of
the burner cap.
Burner Base
Checking Burner Cap Placement
• Check to make sure there is not gap between the
burner cap and burner base. See figure "Burner Cap
Placement" on page 7 to see the correct and incorrect
placements of the burner cap.
Correct Burner Cap Placement
English 7
Burner Cap
Matching letter
designation.
• You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
the cap will click from side to side as the prongs hit the
groove ridge.
Incorrect Burner Cap Placement
Figure 4: Burners Caps
Figure 5: Burner Cap Placement