Connect Video Source Outputs To Vs-2 Video Inputs - Bose LIFESTYLE DVD Notice D'installation

Dansk Deutsch Español
B S C
ASIC YSTEM ONNECTIONS
6
Figure 10
VS-2 input connections
18
Français Italiano Nederlands

Connect video source outputs to VS-2 video inputs

The VS-2 has video input connectors for a cable/satellite box (CBL-SAT), a VCR, and one
other source (AUX). The type of video connection used for your TV determines the type of
connection you can use for a video source:
If the connection you made to your TV is:
TM
HDMI ............ use any type of connection for your sources.
Component.... use a component, S-Video, or composite video source connection.
S-Video........... use either an S-Video or composite video source connection.
Composite ..... use either an S-Video or composite video source connection.
AUX CBL•SAT
Not available on
VS-2 AUX IN
Svenska
To TV
VCR
VCR
CBL•SAT
AUX
English
Note: If after turning on your
system you can't view cable/
satellite programs through an
HDMI connection, you may need
to change the video output set-
ting in your cable/satellite box. To
do this, use another type of video
connection so you can view the
onscreen menu from your cable/
satellite box. Then change the
connection back to HDMI.