Technical Data - Scheppach BCH5300BP Traduction Du Manuel D'origine

• Do not put hands or feet near or under rotating
parts.
• Never pick up or carry an appliance while the motor
is running.
• Pull the spark from the socket:
– whenever you leave the machine;
– before clearing a blockage;
– before checking, cleaning or working on the ap-
pliance;
– after striking a foreign object. Inspect the appliance
for damage and make repairs as necessary;
– if the appliance starts to vibrate abnormally (check
immediately).
4. Maintenance and storage
• Keep all nuts, bolts, and screws tight to be sure the
appliance is in safe working condition.
• Check the grass catcher frequently for wear or dete-
rioration.
• Replace worn or damaged parts for safety.
• For rotary mowers, ensure that only replacement
cutting means of the right type are used.
– Never store the equipment with petrol in the tank
inside a building where fumes can reach an open
flame or spark;
– Allow the engine to cool before storing in any en-
closure;
– To reduce the fire hazard, keep the engine, silencer,
battery compartment and petrol storage area free
of grass, leaves, or excessive grease;
– If the fuel tank has to be drained, this should be
done outdoors.
Special satety warning
1. Grip the handles of the brush cutter firmly with both
hands. If you suspend the work, place the throttle
into the idling position.
2. Always be sure to maintain a steady, even posture
while working
3. Maintain the speed of the engine at the level re-
quired to perform cutting work and never raise the
speed of the engine above the necessary level.
4. If the grass gets caught in the blade during opera-
tion, or if you need to check the unit or refuel the
tank always be sure to turn off the engine.
5. If the blade touches a hard object like a stone im-
mediately stop the engine and check if something
is wrong with the blade. If so, replace the blade
with a new one.
6. If someone calls out while working, always be sure
to turn off the engine before turning around.
7. Never touch the spark plug or plug cord while
the engine is in operation. Doing so may result in
being subjected to an electrical shock.
8. Never touch the muffler, spark plug or other me-
tallic parts of the engine while the engine is in
operation or immediately after shutting down the
engine. Doing so may result in serious burns.
9. When you finish cutting in one location and wish to
continue working in another spot, turn off the engi-
ne and turn the machine to have the blade facing
away from your body.
10. Check that the cutting attachment stopped turning
under the engine idle before starting to use the
machine.
Residual risks
• There will always be residual risks, even if you use
this equipment according to instructions. The fol-
lowing hazards can occur in connection with the
construction and design of this tool.
• Health hazards resulting from swinging of hand and
arm if the equipment is used for an extended period
and if it is not operated or maintained properly.
• Injuries and material damage caused by ejection
of tool attachments which are unexpectedly thrown
from the equipment because of sudden damage,
wear and tear or improper attachment.
• Warning! This tool generates an electromagnetic
field during operation. Under certain circumstan-
ces, this field can affect active or passive medical
implants.
In order to reduce the risk of severe or fatal injuries,
we recommend that people with medical implants
consult their doctor and the manufacturer of the me-
dical implant before operating the machine.
Before working on the tool itself (e.g. transport,
set-up, retooling, cleaning and maintenance), dis-
connect the spark plug cap!

6. Technical data

BCH5300BP
Technical data
Cutting data grass trimmer
Cutting circle
diameter of line mm
Cutting line diameter
mm
Cutting line length m
Max. cutting speed
max. min
-1
Cutting data brush cutter
Cutting circle
diameter of blade
mm
Cutter balde
thickness mm
Teeth quantity
Max. cutting speed
max. min-1
Power unit
Displacement ccm
Max. engine output W
Fuel tank capicity l
2-stroke engine, air-cooled
Engine type
Weight kg
Subject to technical changes!
concerning noise
Information
according to relevant standards:
Sound pressure L = 97,1dB(A)
pA
Sound power L = 115,3 dB(A)
WA
450
2 x 2.8
4
7200
255
1.4
3
8500
51.7
1300
1.0
11,4
emission measured
GB 25