How To Manage: Error Codes - Electrolux KVLBE08T Notice D'utilisation

The oven does not turn on or does not heat up
Possible cause
The clock is not set.
The door is not closed correctly.
The fuse is blown.
The oven Child Lock is on.
Components
Description
The lamp is burnt out.

12.2 How to manage: Error codes

When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description
F240, F439 - the touch fields on the display do
not work properly.
F908 - the oven system cannot connect with
the control panel.
When one of these error messages continues to appear on the display, it means a faulty
subsystem may have been disabled. In such a case contact your dealer or an Authorized
Service Centre. If one of these errors occurs, the rest of the oven functions will continue to work
as usually.
TROUBLESHOOTING
Remedy
Set the clock, for details refer to "Clock Func‐
tions" chapter, How to set: Clock functions.
Fully close the door.
Make sure the fuse is the cause of the prob‐
lem. If the problem recurs, contact a qualified
electrician.
Refer to "Menu" chapter, Submenu for: Op‐
tions.
Remedy
Replace the lamp, for details refer to "Care and
Cleaning" chapter, How to replace: Lamp.
Remedy
Clean the surface of the display. Make sure
there is no dirt on the touch fields.
Turn the oven off and on.
67/224