Publicité
Les langues disponibles
Les langues disponibles
1. In Camera mode, set the resolution size to 1.2M (see section "Selecting the Photo
Resolution".) and press FRAME (4).
2. Use NEXT/PREVIOUS buttons until you find a frame you like (5 frames in total).
3. Press the Shutter key (7) to take a picture with the selected frame.
4. To go back to Camera mode, press FRAME (4).
Note: The photo frame function cannot be used in video mode and other resolutions.
1. Press the "Power/Menu" button once, then use the "Previous" button to select the
"Image quality" icon
2. Press OK repeatedly to select the desired image quality.
There are 2 levels of quality:
3. Press the "Power/Menu" button to go back to Camera mode.
1. Press the "Power/Menu" button once, then use the "Previous" button to select the
"Frequency" icon
ed on
2. Press OK repeatedly to select the desired frequency: "50HZ" or "60HZ".
3. Press the "Power/Menu" to go back to Camera mode.
ow steps
1. Press the "Mode" button (8) repeatedly until the video icon
screen.
2. Press the Shutter key to start shooting videos. The recording length is displayed on
to select
the LCD screen.
3. Press the Shutter key again to stop recording and automatically save the video in
AVI format.
4. To go back to "Single shooting" mode, press the "Mode" button repeatedly until the
Note:
• To use the flash in "video mode", please activate the flash first by pressing the flash
button.
• You can use Windows Media Player or QuickTime (not included on the software CD
to play AVI files on your computer.
DJ140SW_IM1275_291_V08.indb 13
SELECTING THE IMAGE QUALITY
.
High quality. /
Low quality.
SELECTING THE LIGHT SOURCE FREQUENCY
.
CAPTURING VIDEO CLIPS (Video Mode)
icon is displayed on screen.
PHOTO FRAME FUNCTION
is displayed on
13
30/06/2015 12:45
Publicité
