Care And Maintenance - BUSCH 2737 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To Repeat Programmed Tracks
During programmed playback, press the PLAY MODE
button (8) once to repeat the specifically programmed
track. The indicator is shown. Press the PLAY MODE
button twice to repeat all the programmed tracks. The
indicator is shown. Press the PLAY MODE button
again. The »INTRO« indicator will be blinking. Press
PLAY/PAUSE/WAKE
first 10 seconds of each programmed track and the CD
player will stop automatically. Press the PLAY MODE
button again to cancel all PLAY MODE settings on
programmed tracks. All PLAY MODE indicators (» «,
»
«, »INTRO« and »SHUFF«) disappear.
More Functions
To Set Up the Microphone and Sing-Along Feature
Plug the microphone (included) into the MIC jack (14)
on the right side of your unit. The output is mixed with
playback from LINE IN or CD. On the microphone, there
is an ON/OFF switch. Ensure that you set the switch to
ON position during the usage. The volume of micro-
phone can be adjusted by the VOLUME knob (13) on the
right side of the unit together with the speaker volume
at the same time. There is no independent microphone
volume control.
To Set Up the LINE IN Jack
The LINE IN feature allows you to connect your MP3
player, smartphone or other audio sources/devices to
broadcast the playback through the speaker on the unit.
Plug a 3.5mm audio cable (not included) into your MP3
player or external audio source/device and connect the
other end (3.5mm jack) into the LINE IN jack (15) on
button, the unit will play the
the right side of your unit. Please note that there is LINE
IN priority for this product. When you plug in LINE IN
onto the unit, CD will stop playback and change to LINE
IN mode automatically. Make sure your MP3 player/
external device and the unit are both switched on. Start
the playback on your MP3 player/external audio source/
device. You can hear the playback from your external de-
vice through the speaker of the unit.
Labels
A label sheet with 30 stickers is included. They are re-
movable i.e. the symbols can be repositioned a few times.
Many funny faces can be created by the kid. Some exam-
ples are shown on page 7.
Alternatively there is a cute picture in the size and shape
of the CD door which can also be sticked onto the player.
Some adult assistance may be required.
Care & Maintenance
Care of the Cabinet
To prevent fire or shock hazard, disconnect your unit
from the AC power source when cleaning.The finish on
your unit may be cleaned with a dust cloth and cared for
as other furniture. Use caution when cleaning and wiping
the plastic parts.
To Clean the Lens
If the lens gets dirty, your player may skip or may not
play a CD. Open the CD door. Use a camera lens blower/
brush to blow on the lens once or twice, brush the dust or
particles off the lens, then blow again. To remove finger-
prints, use a dry cotton swab to wipe from the middle to
outer edge of the lens.
Caring for Compact Discs
Treat the disc carefully. Handle the disc only by its edg-
es. Never allow your fingers to come in contact with the
shiny, unprinted side of the disc. Do not attach adhesive
tape, stickers, etc. to the disc label. Clean the discs pe-
riodically with a soft, lint-free, dry cloth. Never use de-
tergents or abrasive cleaners to clean the disc. If neces-
sary, use a CD cleaning kit. If a disc skips or gets stuck
on a section of the disc, it is probably dirty or damaged
(scratched). When cleaning the disc, wipe in straight
lines from the center of the disc to the outer edge of the
disc. Never wipe in circular motions.
11

Publicité

Table des Matières
loading

Table des Matières