Remote Desktop Connection; Remote Web Administration - Dell PowerVault NX1950 Guide D'installation

Remote Desktop Connection

You can access systems running Windows Unified Data Storage Server 2003
from another Windows-based system by using Remote Desktop Connection.
To facilitate access from the management station, create a remote desktop
connection and save it to your desktop by following these steps:
1 Click Start→ Run.
2 In the Run dialog box, type mstsc and click OK.
3 In the Remote Desktop Connection dialog box, type the system name
or the IP address of the storage server, and then click Options.
4 In the Connection Settings window, click Save As.
5 In the Save As dialog box, enter the file name you would like to use
for the connection, and leave the extension as .rdp.
6 In the Save in drop-down menu, select Desktop, and then click Save.
For more information about configuring your Remote Desktop
Connection see "Remote Desktop Connection" on the Microsoft website
at http://go.microsoft.com/fwlink/?LinkId=69058 or see the
Windows Unified Data Storage Server 2003 Help.

Remote Web Administration

You can remotely access a server running Windows Unified Data Storage
Server 2003 from a client system by using a web browser. For systems
running a Windows operating system and Internet Explorer 6 (or later),
use the Remote RDP Client ActiveX control. The ActiveX control is
synonymous to the Remote Desktop Connection, MSTSC.
Connecting to the PowerVault NX1950 Storage System Initially
21