Harman JBL STAGE 1220B Mode D'emploi page 4

SPEAKER CONNECTIONS
Connect the + and – terminals on the enclosure to the amplifier's outputs, observing proper polarity. Use at least 0.5mm
(20 AWG) speaker wire for the connections to the enclosure.
BATTERY
SPECIFICATIONS
Stage 1220B
Woofer: 2 x 12" (300mm)
Power handling: 500Wrms
Power handling, peak: 1000W
Sensitivity (2.83V @1m): 94dB
Frequency response: 34Hz – 200Hz
Impedance: 2 ohms
Dimensions: 30-1/8" x 15" x 13-11/16" x 10-1/2"/
(WxHxD1xD2) (764.5mm x 380mm x 347.5mm x 266.7mm)
GENERAL CARE
The loudspeaker may be cleaned with a damp cloth. Do not use any cleaners or solvents.
A valid serial number is required for warranty coverage. This product is designed for mobile applications and is not intended for
connection to the mains.
HARMAN International
Industries, Incorporated
8500 Balboa Boulevard,
Northridge, CA 91329 USA
www.jbl.com
STAGE 1220B
HEAD UNIT
Remote
L R
Turn-On
Speaker Out
AMP
© 2017 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the
United States and/or other countries. Features,specifications and appearance are subject
to change without notice.
2
Stage 1220B