Playing Records - Technics SL-1500C Mode D'emploi

Playing records

Preparation
1 Put a record (not included) on the turntable.
2 Take off the stylus cover and release the arm clamp.
1
Press [ ] to turn the unit on.
33-1/3 rpm is automatically selected and
the indicator [33] lights.
Attention
 Do not press [START-STOP] when the turntable is removed.
If you have accidentally pressed [START-STOP]
· The indicator of the speed select button ([33] or [45]) starts blinking.
 If it is blinking, press [
the unit on.
 Turn the unit on or off with the volume on the connected device set to the minimum.
1
2
Speed select buttons
Indicators
Cartridge
Stylus cover
①
②
③
18
(18)
English
Indicator
] to turn the unit off, fit the turntable and then press [
Centre spindle
1
2
 
Removing the stylus cover
Hold the stylus cover from its front
and back, and while pushing the
latch on the rear part (
tilt the stylus cover downward (
2
Press [START-STOP].
The turntable starts revolving.
2
 
Attaching the stylus cover
Hold the stylus cover from its
front and back, align with the

), slowly front of the cartridge, and

). slowly lift it (
to damage the stylus.
] to turn
3 4
·

) taking care not