Preparations - Kenwood KDC-BT73DAB Guide De Démarrage Rapide

Preparations

[Control] knob (Volume knob)
Release
Canceling the Demonstration
mode
Cancel the Demonstration mode when
you use the unit for the first time after
installation.
1
Press [Control] knob to cancel the
Demonstration mode when the message
"To cancel DEMO Press the volume knob"
appears (approx. 15 seconds).
2
Turn [Control] knob to select "YES", and
then press [Control] knob.
The Demonstration mode can also be
canceled in the Function Setting mode.
Refer to <12-6. Demonstration mode
setting> in Instruction manual
4 | Quick Start Guide
Detaching/ Attaching the faceplate
!
• Remove the faceplate at once after
pressing the Release button; otherwise it
can fall down due to vibration.
• The faceplate is a precision component of
the unit and can be damaged by shocks
or jolts.
• Keep the faceplate in its case while
detached.
• Do not place the faceplate (and case) in
areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with
too much dust or the possibility of water
splashing.
Press the
Release button.