Preparations/ Basic Operations
Auxiliary input
[SRC]
USB terminal
[DISP]
Canceling the Demonstration Mode
Cancel the demonstration mode when you use it for
the first time after installation.
1
Press the [Control knob] to cancel the
Demonstration mode when the message "CANCEL
DEMO PRESS VOLUME KNOB" appears (approx. 15
seconds).
2
Turn the [Control knob] to select "YES", and then
press the [Control knob] knob.
The demonstration mode can also be canceled in
the Function setting mode.
Refer to <11-3. Demonstration mode setting> of
Instruction manual.
Adjusting the Clock
1
Press and hold the [Control knob].
2
Turn the [Control knob] to adjust the hour, and
then press the [Control knob].
3
Turn the [Control knob] to adjust the minute, and
then press the [Control knob].
Power
Press the [SRC] button to turn on the power.
Press and hold the [SRC] button to turn off the
power.
Volume
Turn the [Control knob] to adjust the sound
volume.
Attenuator
Press the [Control knob].
Turning the volume down quickly.
4 | Quick Start Guide
[Control knob] (Volume knob)
Source selection
Press the [SRC] button repeatedly to select a
sources.
Source
Standby
Tuner
USB or iPod
aha (Function of DPX405BT)
Bluetooth audio (Function of DPX405BT)
CD
[1]
Auxiliary Input
This source can be selected only when it can be
[1]
played.
DPX305U
Press the [iPod] button to switch the source to
iPod.
USB terminal
A USB device or iPod can be connected.
The CA-U1EX (optional accessories) or KCA-iP102
(optional accessories) is recommended to connect
a USB device or iPod.
Auxiliary input
Portable audio device can be connected with the
stereo mini-plug (3.5 mm ø).
Display selection
Each time you press the [DISP] button, another
display mode will be selected.
Refer to <10-4. Text Display Selection> of
Instruction manual
Display scroll
Press and hold the [DISP] button to scroll the CD or
Audio file text display.
DPX305U
[iPod]
[1]
[1]
Display
"STANDBY"
"TUNER"
"USB" or "iPod"
"AHA"
"BT AUDIO"
"CD"
"AUX"