Daily Use - AEG SCB61816NS Notice D'utilisation

Masquer les pouces Voir aussi pour SCB61816NS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6
www.aeg.com
3.2 Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator
button if all LED are off.
3.3 Switching off
Keep touching the temperature
regulator button for 3 seconds.
All indicators light off.
3.4 Temperature regulation
To operate the appliance, touch the
temperature regulator until the LED
corresponding to the required
temperature lights up. Selection is
progressive, varying from 2°C to 8°C.
Coldest setting: +2°C.
Warmest setting: +8°C.
A medium setting is
generally the most suitable.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature

4. DAILY USE

WARNING!
Refer to Safety chapters.
4.1 Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap
to remove the typical smell of a brand-
new product, then dried thoroughly.
CAUTION!
Do not use detergents,
abrasive powders, chlorine
or oil-based cleaners as they
will damage the finish.
• frequency of opening the door
• quantity of food stored
• appliance location.
1. Touch temperature regulator.
Current temperature indicator blinks.
Any time you touch the temperature
regulator, the setting moves by one
position. The corresponding LED blinks
for a while.
2. Touch the temperature regulator
until the required temperature is
selected.
3.5 FROSTMATIC function
You can activate FROSTMATICfunction
by pressing the FROSTMATIC button.
The LED corresponding to the symbol
FROSTMATIC indicator lights up.
You can deactivate
FROSTMATICfunction by pressing the
FROSTMATIC button again.
The FROSTMATIC indicator will light off.
This function stops
automatically after 52 hours.
4.2 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1. Gradually pull the shelf in the
direction of the arrows until it comes
free.
2. Reposition as required.

Publicité

Table des Matières
loading

Table des Matières