10
www.aeg.com
4.4 Frostmatic function
The Frostmatic function is used to
perform pre-freezing and fast freezing in
sequence in the freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time,
protects food products already stored in
the freezer compartment from
undesirable warming.
To freeze fresh food activate
the Frostmatic function at
least 24 hours before placing
the food to complete pre-
freezing.
To activate Frostmatic function press the
Frostmatic button (7) for 3 seconds. The
Frostmatic indicator switches on.
This function stops
automatically after 52 hours.
It is possible to deactivate the function at
any time by pressing Frostmatic button
(7) for 3 seconds again. The Frostmatic
indicator switches off.
4.5 High temperature alarm
When there is a temperature increase in
the freezer compartment (for example
5. DAILY USE
5.1 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1. Gradually pull the shelf up until it
comes free.
2. Reposition as required.
due to an earlier power failure), the
freezer compartment indicator flashes
and the sound is on.
To deactivate the sound press any
button.
The freezer temperature indicator LED
continues to flash until the normal
conditions are restored.
If you do not press any button, the sound
switches off automatically after around
one hour to avoid disturbing.
4.6 Door open alarm
If the fridge door is left open for
approximately 5 minutes, the fridge
compartment indicator flashes and the
sound is on.
During the alarm the sound can be
muted by pressing any button. The
sound switches off automatically after
around one hour to avoid disturbing.
The alarm deactivates after closing the
door.
5.2 Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the
shelves can be positioned as desired.