Bosch GBH Professional 2-24 RE Notice Originale page 8

8 | English
(7) Rotational direction switch
(8) Lock-on button for on/off switch
(9) On/off switch
(10) Release button for impact/mode selector switch
(GBH 2-24 DRE, GBH 2-24 DFR)
(11) Impact/mode selector switch (GBH 2-24 DRE,
GBH 2-24 DFR)
(12) Button for depth stop adjustment
(13) Depth stop
(14) Auxiliary handle (insulated gripping surface)
(15) Release button for "drilling/hammer drilling" se-
lector switch (GBH 2-24 RE)
(16) "Drilling/hammer drilling" selector switch
(GBH 2-24 RE)
(17) Handle (insulated gripping surface)
(18) Securing screw for keyed chuck
Technical Data
Rotary hammer
Article number
Speed control
Stop rotation
Clockwise/anticlockwise rotation
Quick-change chuck
Rated power input
Impact rate
Impact energy per stroke accord-
ing to EPTA-Procedure 05:2016
Rated speed
Tool holder
Spindle collar diameter
Max. drilling diameter
– Concrete
– Masonry (with hollow core bit)
– Steel
– Wood
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according
to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power
level 104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
1 609 92A 77M | (22.12.2021)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
a) Accessories shown or described are not included with the
a)
product as standard. You can find the complete selection of
accessories in our accessories range.
GBH 2-24 RE
3 611 B72 0..
W
-1
min 0–4200
J
-1
min 0–930
SDS plus
mm
mm
mm
mm
mm
kg
Vibration total values a
determined according to EN IEC 62841-2-6:
Hammer drilling into concrete: a
Chiselling: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
a)
Keyed chuck
a)
SDS plus shank for drill chuck
Drill chuck holder (GBH 2-24 DFR)
Front sleeve of the keyless quick-change chuck
(GBH 2-24 DFR)
Retaining ring of the keyless quick-change chuck
(GBH 2-24 DFR)
a)
Saugfix suction opening
a)
Saugfix clamping screw
a)
Saugfix depth stop
a)
Saugfix telescopic tube
a)
Saugfix wing bolt
a)
Saugfix guide tube
Universal holder with SDS plus shank
GBH 2-24 DRE
3 611 B72 1..
● ●
– ●
● ●
– –
790 790
0–4200
2.7 2.7
0–930
SDS plus
48.5 48.5
24 24
68 68
13 13
30 30
2.8 2.8
/ II / II
(triax vector sum) and uncertainty K
h
=19.3 m/s
h
2 2
=10.7 m/s , K=1.5 m/s ,
h
a)
GBH 2-24 DFR
3 611 B73 0..
●
●
●
●
790
0–4200
2.7
0–930
SDS plus
48.5
24
68
13
30
2.9
/ II
2 2
, K=1.5 m/s ,
Bosch Power Tools