SPORTSTECH HGX200 Mode D'emploi page 67

STEP 9
Attach the right butterfly adjustment(25#) through the hole of the front press base and secure them with 1pc spacer
(71#),cover(53#), 1pc M6 Aircraft nut (104#) and 1pc M6X33 Allen bolt(142#).
Attach the right butterfly (10#) to the right butterfly adjustment(25#) and secure them together 1pc M8×23 Allen bolt
(90#),2pcs plastic washer(73#) and 1 pc M8×70Allen bolt(108#). You can select the desired butterfly position with
the lock pin (52#).
Attach the foam roll (37#) as the diagram shows and secure the handle bar(12#) with 1 pc M10*20 Allen bolt(92#) and
1pc Ø10 washer(105#).
Use the same way to install the left ones.
142
53
104
53
104
142
90
108
108
105 52
12
105
92
80
59
37
67