Publicité
7
#10-24X1" Screw
X8
Install legs by engaging leg tabs over bottom edge of the appliance body.
Ÿ
Once the leg is in place, attach two #10-24x1" screws through the leg and into the appliance body.
Ÿ
Repeat for the remaining legs. DO NOT Tighten the screws at this point.
Ÿ
When all four legs are loosely installed, carefully turn the unit upright.
Ÿ
Carefully Level the unit and securely tighten the screws.
Ÿ
15
10
Publicité
