Foppapedretti Babyguard Mode D'emploi page 35

4. Product maintenance
The external lining is removable and washable according to the instructions
indicated on the inner label. Follow the instructions carefully to avoid damage:
• Open the zip and take out the interior, taking care to store it in a clean, dry
place when it is without the lining.
• Insert the interior again after washing, placing the weight sensor facing the side
of the lining with the word "Babyguard".
• Do not tamper with the inside or disassemble it, do not remove the weight
sensor.
5. False readings
• The Babyguard detection device is very sensitive, therefore, when the child is
not placed in the car seat, do not leave objects on the mat, even if they are not
very heavy, and do not place the car seat buckle and/or chest straps on the mat
to avoid false readings.
• The Babyguard cushion must be positioned on the car seat in contact with the
child. If the car seat includes a reducer, the Babyguard cushion must be placed
on top of it.
• Make sure that the Bluetooth function is activated on the device on which the
APP is installed, and that the localization function is activated.
6. Support
For information and support please write to:
7. Warranty
This product is guaranteed against any lack of conformity under normal
conditions of use according to the instructions. This warranty will not be applied,
therefore, if there is any damage resulting from improper use, wear or accidents.
For the duration of the warranty on conformity defects, please refer to the specific
provisions of the national regulations applicable in the country of purchase, where
required.
• ENGLISH •
MAINTENANCE
servizio@foppapedretti.it
35