[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On] – enjoy quiet viewing at night
(DVDs only).
•
[Off] – enjoy surround sound with its full
dynamic range.
Video setup
On [Video Setup Page], you can set the
following options:
[Component]
Set the video output according to the video
connection. If the composite connection is
used, this setting is not required.
•
[S-Video] – If the S-Video connection is
used, select this option.
•
[Pr/Cr Pb/Cb Y] – If the component
connection is used, select this option.
•
[RGB] – If the SCART connection is used,
select this option.
[Picture Setting] > [Picture Setting Setup]
Customize picture color settings.
[TV Mode]
Select the video output mode. To select the
progressive scan mode, ensure that you have
connected a progressive scan TV and set
[Component] to [Pr/Cr Pb/Cb Y].
•
[Progressive] – For progressive scan TV:
turn on the progressive scan mode.
•
[Interlace] – For ordinary TV: turn on the
interlace mode.
Preference setup
On [Preference Page], you can set the following
options:
[TV Type]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
•
[PAL] - For TV with PAL color system.
•
[Multi] - For TV that is compatible with
both PAL and NTSC.
•
[NTSC] - For TV with NTSC color
system.
[Audio]
Select the preferred audio language for disc
play.
[Subtitle]
Select the preferred subtitle language for disc
play.
[Disc Menu]
Select the preferred disc menu language.
Note
•
If the language you have set is not available on
the disc, the disc uses its own default language.
•
For some discs, the subtitle/audio language can
only be changed from the disc menu.
[Parental]
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
Press OK/
.
Select a rating level, then press OK/
Press the numeric keys to enter the
password.
.
EN
23