Start-Up; Installation - MC Crypt 59 08 00 Notice D'emploi

Start-Up

To ensure that the device is set up correctly, always read these operating instructions including
the safety instructions thoroughly and attentively before use.
Check the device for damage before using it. If the device is damaged, do not operate it and
consult an expert or our service team.

Installation

The assembly and the installation of the device must be carried out by a specialist who is
familiar with the hazards and the relevant regulations. Any repairs, operation and maintenance
may only be carried out by qualified persons.
When choosing a location for your device, make sure to avoid impact, vibration, dust, hot and
cold temperatures and dampness. Furthermore, no powerful transformers or motors must used
close to the device.
The light effect may only be operated in locations with an ambient temperature between 2°C and
45°C.
The device must be mounted out of normal reach.
Easily flammable materials such as decorative fabrics must have a distance of at least 0.5 m to
the device. Otherwise such objects may catch fire!
When mounting the product, make sure that the power cord is neither jammed nor damaged by
sharp edges.
During installation or service work, the area below the place of installation must be cordoned
off.
The installation surface or mounting fixture needs to be designed in a way that it can take 10
times its load capacity for at least 1 hour without any permanent damaging deformation.
It is also essential that the device is secured by means of a second safety restraint that is
independent of the actual mounting supports when installing it in an elevated position. If the
main support fails, no part of the installation must fall down.
During mounting, all the relevant regulations (in particular BGV C1, formerly VGB 70 and EN
60598-2-17) must be observed.
21