GUTFELS KA8102swi Mode D'emploi page 21

Press on the programming button until the number flashes again.

Press the buttons for the hours and the minutes to set the desired brew time.

When the brew time is set, choose the coffee powder mode or the coffee mill mode.

If you choose the coffee mill mode (indicator lamp of the coffee powder mode

selector switch off), select the number of cups and the desired aroma and
confirm the programming by pressing the programming button. The timer
symbol
programming button will be lit.
If you choose the coffee powder mode (indicator lamp of the coffee powder

mode selector switch lit), confirm the time programming directly by pressing the
programming button. The timer symbol
and the indicator lamp of the programming button will be lit.
Once the programming has been confirmed, the LCD display shows the actual time again.

If you have chosen the coffee mill mode, the LCD display will show the number of cups
and the aroma of the last use and not the ones of your programming once the clock
mode is back. Do not worry as long as the timer symbol is lit, the programming is well
registered.
Attention: if you do not confirm the programming or if you do not press any key within 7
seconds, the brew time will be saved in the memory but the coffee maker will not be in the
programming mode.
Pour the right amount of water into the water tank, put a filter into the filter holder and

add coffee powder (into the filter) or coffee beans (into the coffee bean compartment)
according to your programming choice. In both cases, the procedure is the same as for a
manual use except that you do not have to press the ON/OFF switch.
When your preset brew time is reached, the coffee maker will start its brew cycle in the

same way as with the manual use.
As with the regular brew cycle, an automatic keep-warm cycle will commence after your

coffee maker has finished brewing. When the 35 minutes are over, the coffee maker will
automatically shut itself off.
If you wish to delete a programming, press the programming button until the timer symbol

goes out.
DECALCIFICATION AND CLEANING
Before cleaning or maintenance, turn off the appliance, unplug it and let it cool down.

The cover of the coffee bean compartment, the filter holder, the filter, the carafe and

carafe lid can be cleaned in a solution of warm water and mild liquid soap. Dry them well
before putting them back in place.
The coffee maker can be cleaned using a damp cloth. Never immerse the body of your

coffee maker in water or any other liquid. Never use abrasive cleaning products or
solvents.
Reassemble the different parts of the appliance correctly before storing it in a dry place.

Decalcifying the coffee maker prolongs its life span. For decalcification only use products

especially made for the decalcification of coffee makers.
Never use a dishwasher to clean the jug. Just clean it in soapsuds.

CLEANING OF THE GRINDER
To maintain a good functioning of your appliance we advise you to clean the "grinder" every 2
weeks.
Before cleaning the "grinder", first clean the appliance, then put a new filter in the filter

holder, check if the filter holder is well in place and close the filter holder compartment
again.
will then be steadily illuminated and the indicator lamp of the
21
will then be steadily illuminated