REMA CBKN Série Mode D'emploi page 12

10.TROUBLESHOOTNG CHECKLIST
Failure/malfunction
Load slipping
Body bent
Lifting shackle oval
shaped
Spring defective
Shackle pins bent
Retaining pins
missing
Clamp difficult to
open/close
11. WARRANTY
REMA Lifting Clamps provides a 5 year warranty on its lifting clamps.
This warranty is applicable to the original end user of the lifting clamps. Only if the clamp has been
inspected, checked and maintained by this instructions and by an official dealer.
This warranty period of 5 years is valid from the day of purchase, and is liable to all conditions and
measurements stated in this document.
11a. CONDITIONS
This warranty only covers failures in the lifting tools which is the consequence of production errors which
occur during normal use. The warranty covers no wear to components such as pivots, cam assemblies, lock
springs etc. Should there be any kind of failure within this guarantee period, the lifting tool will be replaced
or repaired to insight of the producer
No warranty is given to clamps due to the following failures:

Regular wear

Overload.

Wrong and/or carelessly use

Damages

Not following procedures and measures

Hoisting differing material other then indicated on clamp or stated in the user-manual

Adapting and/or modifying of the REMA clamp.

The injudicious use of the clamp, and not succeeding all indications which are stated in the users
manual.

When maintenance and/or revision has not been carried out by an authorised REMA distributor.
The producer is not responsible for incidental damage or damage due to use of the lifting tools as well as
from violation of this manual.
Possible Cause
Load dirty Clean load
Pivot and/or cam
dirty Clean clamp
Pivot and/or cam
blunt Overhaul clamp
Jaws bent open Reject clamp
Clamp overloaded Reject clamp
Clamp overloaded Reject clamp
Spring worn out Overhaul clamp
Clamp overloaded Reject clamp
Incorrect assembled Fit new retaining pins
Key way slot dirty Clean clamp
Clamp worn out Reject clamp
Clamp
contaminated Clean clamp
Clamp overloaded Reject clamp
12
Action