hergom E-40 Instructions D'installation, De Service Et D'entretien page 20

1 - INTRODUCTION
IMPORTANT! All local regulations, including those that refer to national or European regulations, must
be applied when installing this device.
The way the E-40 Stove is installed will decisively affect safety issues and its correct operation.
It is important to install the fireplace correctly. For the correct installation of the E-40 Stove and
chimney, we recommend the installation be performed by a professional.
The E-40 Stove provides heat by radiation; directly heating walls, ceilings...
2 - PRESENTATION
E-40 wood stoves have the following main features:
Made of cast iron, with parts that are assembled, sealed and screwed together.
 The internal lining is manufactured in cast iron White enameled
 Cast iron baffle, including a vertical flap that retains the hot smoke longer in the stove, making
the unit more efficient.
 Vertical smoke exit through the top with the possibility to switch to Horizontal smoke exit
through the rear.
 Hinged front door with ceramic glass pane.
 They are designed for use with firewood only.
 They can burn pieces of wood up to 50 in length.
 Exterior ash pan
 Blind grill
 Lighting up valve
 Primary air adjustment valve.
 Self-cleaning glass.
 Optional outside air connection located on the back of the ash pan
 Removable leg screws to stabilize the stove when installed in irregular surfaces.
 This fireplace provides heat by radiation directly heating walls, ceilings
 Fully factory assembled, ready for connection to the chimney
Door
handle
Puerta
Regulation
handle
Ash-pan
Optional rear
output smoke
Outside air
connection
20