Astralpool HEAT B300-T Manuel Technique page 34

ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM
TECHNICAL MENU
Ver 1.08
Machine Type
Heat and/or Cool
Operation
Comfort/Filtration
Language
English
Units
º Celsius
Temp. Adjustement
A XX.Xº C
Differentia Temp
XX.Xº C
ECO Temp Diff
XX.Xº C
© ASTRALPOOL 2010. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
This screen only appears of the machine is reversible and the
•
"Cool" option is activated (see next page).
Permits the selection of the type of machine:
•
HEAT or COOL
In order for the HEAT+COOL option to be available, the
•
"Heat+Cool Mode" option must be previously activated in the
technical menu.
This screen only appears if the "Comfort Function" is
•
activated (see following page).
Permits the selection of the Comfort ↔ Filtration
•
functions.
This option is used to select the screen language.
•
Castellano ↔ Français ↔ English...
This option is used to change the temperature format:
•
Celsius or Fahrenheit.
Calibration of the water temperature.
•
The calibration is modified using the "+" "-"keys.
•
RESET the calibration using the "MENU" key.
•
The system does NOT automatically exit
this menu after a period of time 
Temperature differential setting:
•
Margin of degrees with regard to the temperature setting.
•
See chapter 5.7, (Temperature regulation).
•
Maximum: 10 ºC
•
Temperature differential added to the parameter
•
"Temperature differential"· when the ECO Mode is
activated.
If the "ECO Temp Diff." is set at "0", the user cannot use
•
the ECO mode.
"ECO Dif." Máximo = 5 ºC.
•
ENGLISH
Page 34 of 246