Parameters Of The Technical Menu - Astralpool HEAT B300-T Manuel Technique

ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM
NOTE:
THE CONTROLLER WILL LEAVE THIS MENU AFTER A PERIOD OF TIME OR IF THE
USER PRESSES THE MODE KEY.
The MENU key is used to select the type of operation is desired for the machine:
HEAT
•
COOL
•
• HEAT AND COOL
If the machine is non-reversible, HEAT will be the only operation possible for the machine and
therefore options will not even appear in the menus.
In order to have the operations "Cool" and "Cool+Heat", the machine must be reversible, that is,
be equipped with a 4-way valve.
The COOL option will only appear under two conditions:
The machine is reversible (equipped with a 4-way valve).
•
The COOL option was activated in the technical menu.
•
And the HEAT and COOL options will appear under the above conditions and one additional
condition:
The HEAT+COOL MODE option was activated in the technical menu.
•

5.4 Parameters of the Technical Menu

The technical menu includes certain parameters which condition the operation of the machine.
Accessing the Technical Menu from the User Menu: Just press the
when on the "User Menu":
USER MENU
Ver 1.08
To return to the User Menu from the Technical Menu just repeat the same process: press the
"+" key for five seconds.
NOTE
: AFTER 15 MINUTES OF INACTIVITY ON THE KEYBOARD, THE MACHINE WILL
RETURN FRO M THE TECHNICAL MENU TO THE USER MENU AUTOMATICALLY.
The following table indicates the different parameters which are accessible from the technical
menu:
© ASTRALPOOL 2010. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
TECHNICAL MENU
5 sec.
ENGLISH
key for five seconds
Ver 1.08
Page 33 of 246