Publicité
Les langues disponibles
Les langues disponibles
c) Use of device :
Elements of command and display
Command/Display
Piezo
(n°1 on picture)
Power control knob
(n°3 on picture)
Opening
(n° 2 on picture)
Switching-on
Press the power control knob (n°3 on picture) opposite the star position for a few
seconds.
Press on the piezo (n°1 on picture) to light the burner.
Keep the control knob (n°3 on picture) pressed for some more seconds.
The burner then remains lit and it is now possible to increase the power by turning
the power control knob (n°3 on picture).
Grease the plate before each cooking.
Temperature setting
Once the burner is lit; set the appliance to the desired power by turning the control
knob (n°3 on picture).
It is not necessary to leave the device switched on at full power. It is necessary
to adapt the temperature to products to be cooked to limit the gas consumption.
Stopping the appliance
Set each control knob (n°3 on picture) to 0: the appliance is completely switched-
off.
Cut the gas supply
Let the device cool.
Clean the appliance. (See 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.
Function
Switches on the appliance (simultaneously with the power control
knob)
Switches on the appliance (knob pressed simultaneously with pie-
zo)
Controls power (low flame = low power, high flame = high power)
Can replace the piezo and thus helps to switch on the appliance
using a large matchstick or a gas lighter (simultaneously with the
power control knob kept pressed for a few seconds)
17
Publicité
