NovoPress SB 203 Manuel D'utilisation page 6

EN ENGLISH
1. Intended use
The compatible sliding jaws SB203 and SB204 are only suitable for
use with compatible press tools for axial pipe joint systems.
Any other or additional use is regarded as non-intended. Novopress
is not liable for any resulting damage. The user alone bears full
responsibility. Intended use also includes observance of the
Operating Manual and adherence to the inspection and
maintenance conditions.
2. Sliding jaws
EN ENGLISH
1. Intended use
The compatible sliding jaws SB203 and SB204 are only suitable for
use with compatible press tools for axial pipe joint systems.
Any other or additional use is regarded as non-intended. Novopress
is not liable for any resulting damage. The user alone bears full
responsibility. Intended use also includes observance of the
Operating Manual and adherence to the inspection and
maintenance conditions.
2. Sliding jaws
1 Adaptor
2 Ball handle
3 Button
4 Guide
5 Guide rod
6 Jaw lever
1 Adaptor
2 Ball handle
3 Button
4 Guide
5 Guide rod
6 Jaw lever
General information on sliding jaws and the adaptors
•
The ball handle can be mounted on either side of the sliding
jaws.
•
The matching adaptor for the system, the nominal width and
the preferred mounting side must be selected in accordance
with the press fitting.
Please follow the system supplier's processing instructions.
General information on sliding jaws and the adaptors
•
The ball handle can be mounted on either side of the sliding
jaws.
•
The matching adaptor for the system, the nominal width and
the preferred mounting side must be selected in accordance
with the press fitting.
Please follow the system supplier's processing instructions.