Troubleshooting - Honda Power Products TILLER F506 Manuel De L'utilisateur

When the engine will not start:
1.Is there enough fuel?
2.Is the fuel valve on?
3.Is gasoline reaching the carburetor?
To check, loosen the drain knob with the fuel valve on. Fuel should
flow out freely. Retighten drain knob.
If any fuel is spilled, make sure the area is dry before testing the spark
plug or starting the engine. Spilled fuel or fuel vapor may ignite.
DRAIN KNOB
4.Is the engine switch on?
5.Is the spark plug in good condition?
Remove and inspect the spark plug. Clean, readjust gap and dry the
spark plug. Replace it if necessary.
6.If the engine still does not start, take the tiller to an authorized Honda
dealer.

10. TROUBLESHOOTING

FUEL VALVE
43