EQUATION EF461L-E Notice De Montage page 111

Les langues disponibles

8. SAFETY CUT-OFF

This appliance is fitted with a safety cut-off which will operate if the fire

overheats (e.g. Due to blocked air vents). For safety reasons, the fire will NOT

automatically reset.

To reset the appliance, disconnect the appliance from the mains supply for at

least 15 minutes. Reconnect the supply to the mains and switch on the appliance.

9. TROUBLESHOOTING

Symptom

No operation/ no fan.

No fire effect light.

10. CLEANING AND MAINTENANCE

Warning- Always disconnect from the mains supply before cleaning heater.

For general cleaning use a soft clean duster - never use harsh abrasive or cleaners.

The glass viewing screen should be cleaned carefully with a soft cloth. DO NOT

use proprietary glass cleaners.

This product does not use a standard bulb for its flame effect. The appliance uses an

electronically controlled LED system to create the effect, therefor no parts need to be

replaced. There are no user-serviceable parts on this appliance. Under no circumstances

should the appliance be serviced be anyone other than a qualified electrician.

Disposal

At the end of the product's serviceable life it should be disposed of thoughtfully

and safely in accordance with local authority regulations. The plug should be

Removed from the power supply cord and the power cord cut from the heater

111

Solution

Check if put the electric plug into the socket.

Check for safety cut-off operation.

Check the LED system by qualified electrician