EQUATION EF461L-E Notice De Montage page 109

Les langues disponibles

7. REMOTE OPERATION

3. Setting the day and time

1) Settings are done on the remote controller

2) Press "DATE TIME" button, then press the "▲" or "▼" key to select the day

3) Press "DATE TIME" button again, then press the "+" or "-" to set the hour

4)Press "DATE TIME" button again, then press the "+" or "-" to set the minute

5) Press "OK" button to complete

4. Temperature setting

The default set temperature is 20 °C, press "+" or "-" on the remote controller

to set the temperature, which ranges from 15 to 30 °C. And this setting is only

for the temperature in the normally mode, not for the temperature in the timer

mode.

5. Timer setting

1) Description of timer setting

There are up to 9 items for timer setting

Each setting item has its date, power-on time and shutdown time

The max. duration of each setting item is 23 hours 50 minutes

The setting date for each item can be any day or days of a week

The date in each setting item represents the date of power-on time

If the shutdown time of the setting falls on the second day, it is unnecessary to

set the date – you just set the shutdown time

2)Steps to view the timer setting

Press the "PROG SET" button

Press the "+" or "-" to check the power-on time of the timer one by one.

For checking the shutdown time, press the "▲" button

Press the "+" or "-" to continue viewing

For deleting the current item of setting, press "C" to delete

3) Steps for timer setting

(I) Select the settings of the serial number

Press the "PROG SET" button, and the serial number starts blinking

Press the "+" or "-" to change the serial number until you get the serial number

that you need to set or modify.

109