Abus TVIP41500 Manuel Utilisateur page 93

English
12.3.7.1 Motion Detection
Area Settings
Activate motion detection by clicking the "Enable Motion Detection" checkbox.
By clicking on "Enable Dynamic Motion Analysis", movements are recorded in the preview image and the
live view (dynamic recording according to motion).
To select an area, click on the "Draw Area" button. The entire area is selected by default. To discard this
selection, click on "Clear All".
Drag the mouse pointer over the desired area. Set the sensitivity using the regulation control bar. To apply
the setting for the area, click on "Stop Drawing".
Right: high sensitivity level
Left: low sensitivity level
93