DeWalt DW935K2 Mode D'emploi page 27

E N G L I S H
Dust extraction (fig. A)
Your D WALT Circular Saw is fitted with a dust
E
extraction outlet (5).
• Always use a vacuum extractor designed in
compliance with the applicable Directives
regarding dust emission when sawing wood.
Vacuum hoses of most common vacuum cleaners
will fit directly into the dust extraction spout.
• Do not use a vacuum extractor without proper
spark protection when sawing metal.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT Power Tool has been designed to
E
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
• Unplug the charger before cleaning the housing
with a soft cloth.
• Remove the battery pack before cleaning your
Power Tool.
• Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
en - 7
Environment
Rechargeable battery pack
This long life battery pack must be recharged when
it fails to produce sufficient power on jobs which
were easily done before. At the end of its technical
life, discard it with due care for our environment:
• Run the battery pack down completely,
then remove it from the tool.
• NiCd cells are recyclable. Take them to your
dealer or a local recycling station. The collected
battery packs will be recycled or disposed of
properly.
Unwanted tools
Take your tool to an authorised D
agent where it will be disposed of in an
environmentally safe way.
WALT repair
E
22