Trouble Shooting - THOMSON MICA TH-020DBK Manuel D'utilisation

Trouble shooting

 No signal icon displayed on the display

The handset is out of range. Move it closer to the base.
 No dialing tone

Check your phone connections.

The handset is out of range. Move it closer to the base.
 No docking tone

The handset is not placed properly on the base / charger.

The charging contacts are dirty. Disconnect the power adaptor first and clean the contact with proper damp
cloth.
 The handset on the charger does not charge

Make sure the batteries are inserted correctly.

Make sure the handset is placed properly on the base / charger

The charging contacts are dirty. Disconnect the power adaptor first and clean the contact with proper damp
cloth.

Batteries are defective. Purchase new ones for replacement.
 No display

Make sure the batteries are charged.

Make sure there is power input and the phone is connected.
 The handset has no ring
 #
Long press button to turn on the ringer.
 Keypad is no use

Check if keypad is locked. Long press
 The volume is too low when taking a call
 Press ▲ button to increase the volume.
 PIN code is lost

You can restore the PIN code to the default value (0000) via Menu>Advanced set> Reset. The PIN code for
remote access can be restored in the same way.
 Most of the functions failed

If the battery icon is flashing, charge the batteries.

Remove the battery, unplug the lines and reinstall after 10 minutes.
Note:
If none of the above suggestions solves your problems, try unplugging the telephone base from the mains and
removing the batteries from all handsets. Wait 15 minutes and then reconnect everything.
*
button to unlock the keypad.
19