On/Off Switch; Pressure Switch - DeWalt D55154 Guide D'utilisation

WARNING: RISK OF FALLING
WHAT CAN HAPPEN
• A portable compressor
can fall from a table,
workbench, or roof
causing damage to the
compressor and could
result in serious injury or
death to the operator.
WARNING: RISK OF INJURY FROM LIFTING
WHAT CAN HAPPEN
• Serious injury can result
from attempting to lift too
heavy an object.
HOW TO PREVENT IT
• Always operate compressor
in a stable secure position
to prevent accidental
movement of the unit.
Never operate compressor
on a roof or other elevated
position. Use additional
air hose to reach high
locations.
HOW TO PREVENT IT
• The compressor is too heavy
to be lifted by one person.
Obtain assistance from oth-
ers before lifting.
CAUTION: RISK FROM NOISE
WHAT CAN HAPPEN
• Under some conditions
and duration of use, noise
from this product may con-
tribute to hearing loss.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
FEATURES (Fig. 1)

ON/OFF SWITCH

Place this switch (A) in the ON position to
provide automatic power to the pres-
sure switch and OFF to remove power
at the end of each use.

PRESSURE SWITCH

The pressure switch (J) automatically starts the motor when the
air tank pressure drops below the factory set cut-in pressure. It
stops the motor when the air tank pressure reaches the factory
set cut-out pressure.
SAFETY VALVE
If the pressure switch does not shut off the air
compressor at its cut-out pressure setting, the
safety valve (G) will protect against high
pressure by popping out at its factory set
pressure (slightly higher than the pressure
switch cut-out setting).
10
HOW TO PREVENT IT
• Always wear certified safety
equipment: ANSI S12.6
(S3.19) hearing protection.
A
G
J