ALPATEC AC 14 EIT Mode D'emploi page 17

notice_AC 14 EIT 26/02/08 11:59 Page 17
INSTALLATION
Active carbon filter.
1. Remove the filter holder.
2. Remove the anti dust filter from its holder.
3. Adjust the active carbon filter size.
4. Put the active carbon filter inthe filter
holder.
5. Replace the anti dust filter.
6. Put the whole back in the air conditionner.
EXHAUST PIPE.
Assemble the exhaust pipe 10 at the rear of the product. For that, extend one extremity of the pipe and
put it in the air outlet 8. Screw the pipe till it is strongly fixed.
Extend the pipe Screw it at the rear
1. USING A SLIDING WINDOW
Use accessories 11 and 12 provided with the product.
17