Features; Assembly - Ryobi RY13050 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Weight - (Without Fuel) .......................................... 27.6 lbs.
Blade Length ................................................................ 9 in.
Edging Depth.................Adjustable from 1/2 in. to 2-1/2 in.
KNOW YOUR WHEELED EDGER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
CURB HOPPER WHEEL
This edger comes with an adjustable curb hopper wheel for
fast and convenient edging over curbs.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
NOTE: Be careful not to bend the throttle cable when
unpacking.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Edger Power Head/Wheel Assembly
Upper Handlebar
Lower Handlebar
5/16 in. Hex Wrench
Funnel

FEATURES

Engine Displacement................................................... 30cc
Engine Lubricant Volume............................................ 65 ml
Fuel Volume .............................................................. 350 ml
DEPTH ADJUSTMENT
Spring loaded front wheel for variable depth adjustment up
to 2 1/2 inches.
ERGONOMIC DESIGN
The design of the edger provides for easy handling. It is
designed for comfort and ease of grasp when operating in
different positions and at different angles.
OIL CAP/DIPSTICK
Remove the oil fill cap to check and add lubricant when
necessary.

ASSEMBLY

PACKING LIST (CONTINUED)
Bottle of 4-cycle Lubricant
Hardware
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always disconnect the engine spark plug
wire from the spark plug when assembling parts.
6 — English