Control Panel And Functions; Cleaning And Maintenance - Klarstein GALINA AMERICANA Mode D'emploi

EN
20

CONTROL PANEL AND FUNCTIONS

• Connect the plug into the
power. Push the switch (1)
into "I", the lamp be on; push
into "0", the lamp be off.
• Push the switch (2) into "I
II III", the motor will be
on "low, mid, high" three
speeds, push into "0", the
motor will be off.

CLEANING AND MAINTENANCE

Turn off the cooker hood before cleaning and maintenance and unplug the appliance
from the wall outlet. The exterior surfaces are susceptible to scratches and stains.
Therefore, do not use abrasive cleaners and wipe away any alkaline or acidic residue
(lemon juice, vinegar) immediately after cleaning.
Stainless Steel Surfaces
The stainless steel must be cleaned regularly to ensure a long service life. Use stainless
steel cleaner. Always wipe along the grain of the stainless steel to prevent scratching.
Control Panel
The control panel can be cleaned with a damp cloth and a mild dishwashing detergent.
Before cleaning, make sure the cloth is clean and well wrung. Use a dry, soft cloth to
remove excess moisture after cleaning.
Monthly Cleaning for Grease Filter
Clean the filter every month can prevent any risk of fire. The filter collects grease,
smoke and dust, so the filter is directly affecting the efficiency of the cooker hood. If not
cleaned, the grease residue (potential flammable) will saturate on the filter. Clean it with
household cleaning detergent.