Haier HCE Mode D'emploi page 8

AFTER-SALE SERVICE
1. Resolving faults by yourself
If you suspect any fault, before conta ng the
approved -sales service directly or via your
dealer, make sure you have observed all instru ons
and advice in this user manual.
2. er-sales service
Consult the enclosed warranty card for available
a er-sales services.
In order to receive immediate help, make sure you
have ready the following essen al data to iden fy
your appliance:
Brand of appliance
Model
Serial number
The problem or reason
Date of purchase
Purchased from/supplier
PRECAUTIONS
If your cabinet is to be discard,you must remove
the door and leave the shelves in place.This will
reduce the possibility of danger to children. And
professional persons.
ENERGY SAVING TIPS
After the appliance has been in operation for some
time,a layer of frost or ice will form on the inside
walls. This increases energy consumption.In order
to save energy and maintain best performance ,
please,defrost the freezer regularly.Refer to User's
instruction chapter "Defrosting".
DECLARATION OF CONFORMITY
The manufacturer of the product/s described herein,
to which this descrip on refers, declares on its sole
responsibility that the product/s meet the relevant
fundamental safety, health and protec on
requirements of the relevant UK and EU
requirements and that the corresponding test
reports are available for examina on by the relevant
authori es and can be requested from the seller of
the appliance, especially with regard to CE
Declara on of Conformity issued by the
manufacturer or with the manufacturers approval.
Moreover, the manufacturer declares that the parts
of the appliance described in this user manual, which
come into contact with fresh food, do not contain any
toxic substances.
The manufacturer works constantly at
the further development of all
products. Please therefore bear this in
mind as the form, set up and
technology are subject to change,
without prior no ce.
4