User Manual
Introduction
Thank you for purchasing from the LINDY HDBaseT Splitter Series. This series consists of 4 and 8 port
HDBaseT Splitters and a HDBaseT Receiver (all sold seperatley) providing you with the flexibility to
purchase receivers only for the number of displays in use, or to add additional receivers at a later date.
Supporting the distribution of uncompressed Full HD 1080p HDMI signals with high resolution for
computer graphics as well as for fluent video transmission, these products are ideal for all types of AV
installation. The HDBaseT Splitters allow you to extend signals up to 100m, to 4 or 8 displays depending
on the model purchased, using high quality Cat.5e/6/7 RJ45 cable.
The HDBaseT Splitters, when installed with HDBaseT Receivers, function as a HDMI Splitter, HDMI over
Cat.6 extender, Infrared over Cat.6 Extender and feature a 2 Port Ethernet Switch integrated in to each
Splitter and Receiver unit.
Package Contents
No. 38116 / 38117
4/8 Port HDBaseT Splitter for HDMI
12V DC/4A Power Adapter
IR Emitter Cable 1.4m
This User Manual
Features
Distrubutes a single HDMI signal, IR & Ethernet to multiple displays
Extends uncompressed HDMI or DVI-D signals up to 100m via its HDBaseT connection
HDMI Full HD 1080p or DVI-D up to 1920 x 1200 (using a HDMI to DVI adapter or cable)
Support for 3D signals, including 1080p 3D
Supports 10/100 Base-T Ethernet via the HDBaseT connection (2 x Port 10/100 Ethernet)
Suitable for use with 3D/HDTV Home Theater, professional HDTV installations, Computer Systems,
Multimedia and Control Center system installations.
Specification
The HDBaseT connection is a dedicated cable connection, it is not an Ethernet connection!
Maximum cable length for the HDBaseT connection: 100m (approx.)
Compatible with HDMI 1.4 specification
HDTV resolutions: 1080p24/30/50/60, 1080i, 720p, 576p, 480p
PC resolutions: From 640x480 to 1920x1200
Support for 3D Signals, including 1080p 3D
Deep Colour capable: supports 30/36/48 bit colour depth
Audio Formats: LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD
IR Extension cables (included) allow the control of IR (33-50 KHz) equipment
Maximum HDMI Cable length, 5m in/out
Splitters and Receiver each have a 2 port RJ45 switch for 10/100 Ethernet support. The 10/100
switches are also connected via the HDBaseT connection
Dimensions: 38116: 148 x 63 x 24mm (W x D x H), 38117: 276 x 156 x 25mm (W x D x H), 38118:
110 x 75 x 25mm (W x D x H)
No. 38118
HDBaseT Receiver
5V DC/2A Multi-Country Power Adapter
IR Receiver Cable 1.4m
This User Manual
1
English