Generator Relay; Inverter Supervision; Lcd Information - IMEON ENERGY IMEON 3.6 Manuel D'installation

3.11 Generator relay

The integrated relay allows automatically starting and stopping the diesel generator via a dry contact
depending on the battery state of charge.
FR
FR
EN
WARNING: The generator must be equipped with a voltage regulator and a frequency
regulator. The output of the generator must comply with the AC input voltage specifications of the
IMEON (N/PE =0 Vac) to be checked prior to connection to IMEON.
The generator will charge the batteries connected to the IMEON through the "GRID CONNECTION"
terminal as soon as the voltage of battery bank is below the "battery cut-off voltage when grid is
available" threshold. The generator will stop automatically. The generator will stop charging the
batteries when the battery pack is recharged.
In order to use this function, you need to go to MANAGER WEB, page "Module", then enable the "Genstart"
module and configure the module. It will auto-configure certain settings of the inverter. To learn more about
auto-configuration, refer to the module description.

4. Inverter supervision

4.1 LCD Information

NOTE: Press any button to turn the display on.
Display :
70
IMEON INVERTER
Manuel d'installation / Installation guide IMEON Inverter – Rev B.5