IMEON ENERGY IMEON 3.6 Manuel D'installation page 80

6.3.2 « Manager » page : FLOW
The "Flow Management" tab allows you to change the mode of operation of the inverter. Refer to the
annex "Mode of operation" for more information on different modes of operation.
FR
FR
EN
6.3.3 « Manager » page: Battery
The "Battery Management" tab allows you to set up the battery bank. The setting varies depending on
the battery technology in use (Lead-Acid or Lithium).
6.3.3.1
Refer to the battery manufacturer's documentation if necessary.
1. To establish communication between the inverter and the battery, an
RJ45 connector wired as presented here should be made for the
inverter's end of the cable.
2. Select the battery from the list, then press "OK".
80
IMEON INVERTER
Using a Lithium battery
Manuel d'installation / Installation guide IMEON Inverter – Rev B.5